WARNING When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. TV studio. Page 9 Deleting Clips Page 10 Connecting External Monitors LINK Connection Page Overview Overview Package Configuration Make sure you have following items supplied with your camcorder.
The number in parentheses indicates the number of that item supplied. Lens hood with lens cap 1 It is attached to the camcorder at the factory. If you attach an optional wide-conversion lens, remove the lens hood. Switching between Progressive and Interlace and Furthermore, thumbnails are automatically generated for each clip as a visual reference, allowing the operator to cue-up to a desired scene simply by guiding the cursor to a thumbnail.
Contact your Sony service representative. A cover page appears automatically in your browser. If it does not appear automatically in the browser, double-click on the index. Page Parts Identifications Hood fixing screw To reattach the hood, align the marks on the hood with those on the camcorder, turn it in the opposite direction from that when you removed it, then tighten the fixing screw. Operation panel on the Viewfinder page 31 Eyecup page 31 Eyepiece focusing knob page 31 Headphone jack stereo mini jack page 66, page 98 i.
If they do not match, the camcorder cannot be attached to the tripod securely. Memory card in slot B is active. Page Preparations AC adaptor. If you connect an AC power source, it has a priority even if a battery pack is mounted. Set the date and time of the built-in clock, using this display. Page Adjusting The Viewfinder These adjustments of the viewfinder have no effect on pictures being recorded.
Caution Do not leave the camcorder with the eyepiece of the viewfinder facing the sun. Direct sunlight can enter through the eyepiece, be focused in the viewfinder, and cause fire. It can be removed by pulling it out, if not necessary. To reattach the eyecup, stretch it a little to attach to the EVF and fit the rim of the eyecup into the horizontal groove of the viewfinder.
Sony accepts no responsibility for any damage or loss of data you recorded. Note on formatting Any SxS memory card formatted with a device other than this camcorder cannot be used with the camcorder. Page Using An External Hard Disk By using the cold shoe kit an auxiliary shoe, four screws, and a bottom plate supplied with the camcorder, you can mount the hard disk unit on the rear accessory shoe of the camcorder.
Mount the auxiliary shoe on the rear accessory shoe. Page Recording When using the remote commander, activate the remote control mode page Note When you hold the camcorder by the grip, support it from underneath with your left hand.
For information of automatic focus adjustment, see page The frame rates are indicated with two-digit integers, rounding off the fractional part. Page Changing The Format SD, these items are automatically changed to the conditions corresponding to the selected mode. ATW Auto-Tracing White balance mode In this mode, the camcorder automatically adjusts the white balance to the appropriate condition.
When the color temperature of the light source changes, the white balance adjustment is automatically executed. If the error message continues to be displayed after several attempts, consult your Sony service representative. Adjusting the Zoom Rotate the zoom ring to adjust the zoom.
Focus can only be adjusted with the focus ring manually. Note The focus instantly moves to the range index position when you pull the focus ring rearward. In this mode, you can activate Auto Focus only when required. In this mode, focus is always adjusted automatically. Focus ring: Forward The range index of the ring is invalid in AF mode. Page Reducing Flickers Reducing Flickers To reduce flickers, try either of the following two methods: Setting the shutter speed according to the power-supply frequency Activate the electronic shutter page 52 and set the shutter speed according to the power supply frequency.
When the frequency is 50 Hz Set the shutter speed to When the frequency is 60 Hz Set the shutter speed to When you insert another memory card, the camcorder starts next recording so that the timecode continues to the last recorded timecode on the card.
In such a case, stop using it Viewfinder release and contact your dealer or a Sony service lever representative. Do not cover the unit while operating Putting a cloth, for example, over the unit can cause excessive internal heat build-up. Page repeated when converting the frame rate. Page With an i. LINK input. LINK input is refused. Batterien nur durch den vom Hersteller empfohlenen oder einen gleichwertigen Typ ersetzen.
Gesetze der jeweiligen Region und des jeweiligen A lithium battery CR for backup is Landes befolgen. If the connected to the camcorder via an connected equipment to recognize equipment still does not react, do the following: i.
LINK connection does the operation. If they are not defective, turn on the power again. If the error persists, consult Sony service personnel. Please Change. Replace the battery with a new one. A partitioned memory card or one that contains recorded clips Unknown Media A exceeding the number permitted with this camcorder is loaded.
Cannot Divide Media Reached The memory card comes to the end of its service life. Make a Rewriting Limit backup copy and replace the card with another one as soon as possible. HQ mode: Approx. Power requirements min. DC 12 V Page Manual Iris mode Manual Zoom mode i. LINK 48, 69, Marker i.
LINK cable Matrix , i. Print page 1 Print document pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Restore password. Upload manual. Upload from disk. Upload from URL. New Manual Focus Mechanism. Sony ECM The guide does not replace the manual but should act as a useful point of reference for those unfamiliar with the cameras.
It should also help guide you through the use of the CineEI mode or change the various gammas settings in custom mode to suit different types of scene. There are sections on exposure tools and controls, the variable ND filter, exposure tools and controls.
0コメント