Rosetta stone microphone setup

Plug in the headset before turning on the Chromebook each time it will be used. This ensures the headset is recognized each time. The easiest way to tell the difference is that USB 3. Use any USB port for the headset. USB 3. It is recommended to be consistent with the USB port used so the headset is more likely recognized upon opening. Single Pin 3. The Chromebook must have the capability of input and output for the single headphones port in order for microphone to function at all. Please note: Earbuds that feature the microphone on the cord are typically not recommended, as the microphone may be too far from the mouth and will pick up ambient noise, background noise, etc.

Step 1: After launching your first activity from the home screen, you will be prompted to select your microphone from an available list. Step 2: Once at the Microphone Setup screen, ensure you are wearing the headset and when ready, click Continue. You will hear a tone, prompting you to count to 5 in a normal speaking voice in your primary language.

For that reason, we recommend counting in the language you are most familiar with during setup. Once the setup has been completed, you will receive a notification if it was successful.

If the setup was not successful, you can repeat it as needed. If you still do not see the correct device, you may need to reboot your system with the headset attached in order to see the device.

Click "Continue" once your headset or sound card is selected. Speak into the microphone in a normal tone. Say "1, 2, 3, 4, 5. Click "Continue" to start your Course, once your microphone is set up properly.

The screenshot below displays the microphone setup screen. For best results, use a device: either a headset or earbuds equipped with a microphone. Click on the Sound icon located on the far right of the Hardware row. Click the "Output" tab. Select your headset as the output device. Click on the Input tab and select your device as the input device. The device will have the same name as the one you selected in the output tab. Plug your headset into an available port or compatible 3.

If you're viewing by Large or Small icons, click "Sound.