Here is a typical view of the DSP firmware update stage:. This is followed by the microcontroller firmware update:. The text over the progress bar indicates which stage is in progress. The entire process will take 15 minutes or so.
When the update is finished, a message will appear:. Click OK to dismiss the message. At this point the process is complete and the Wizard will be ready to close:. Cycle power to the device to restart it. The blue Status power indicator on the front panel should come on solidly.
It went well on my Tangent Quattro. I've restored my favorite presets. Updating to sharpfin-ep2. After that, the update went smoothly. Does somebody know how to build a. This could help to get the IPdio mini working again.
Then you could modify the install-me file there to delete files. Perhaps hpn0t0ad has some idea? That's promising, thanks for the hint. I'll try to create a patch file which also deletes some locales resp. Could take a while as I have not much spare time a the moment but I'll post it here if I have success. Same issues here on my dnt IPdio mini.
Since my tries to upgrade to v2 2 years ago all ports are closed. Thank you so much for the detailed instructions on how to get the radio working again! I have a Tangent radio I did everything, everything works! But I couldn't finish the quick wifi wake up and preset expansion functions. I did everything correctly, made the appropriate changes to the config file, double-checked that the changes were saved, but the radio did not react in any way to the added lines.
I can confirm the lines by hpn0t0ad - if I delete some files before I start the Update to release 2 is all well running. Please modify the remarks for your needed languages before. If this lines included i get also already "bricked" IPdio's back on the ports and have enough space for the release 2. Also the big brother by the "IPdio mini" called "IPdio" without mini have exact the same issues with the low space on the drive. That sounds awesome ymienert! Very nice work. Could you share the patch file, so others could try it?
If it works for others too, I will surely update the guide. It would be easier for people to try it if it was a ready-to-use file, and then it should be I can confirm that the approach of ymienert works. My "bricked" dnt IPdio returned to life and reopened the ports. Attached please find the modified patch file. But be aware: The only language settings left are english and german there.
So the process is to install your patch which seems to be 0. Yes, that's the way for me. Yes, that's the way it works. There is even enough space left after the media server was installed. I patched my IPdio mini with the file Trashwarez posted. That unbricked my radio. Then I installed Sharpfin 2. Many Thanx to Trashwarez. Like Cathesso i managed to patch, update to Sharpfin 2. Some stations i added to the presets work fine, others refuse to connect.
Any idea why? The media server, i. Thanks all for help! I updated the readme and added the IPdio patch file to repository. You need to try if the radio supports HTTP. Thanks all, I used the script from Trashwarez and it unbricked my radio and I was also able to update to 2. Now I just need to find out how to browse my presents directly on the radio without the remote control.
So i wrote a script to let the "reciva gateway not responding" message disappear and to get the station who is stored at position one at the presets store, playing.
This script is only tested on two IPdio mini yet. But I have no idea why it should not be working on another reciva radio device as well. Prerequisites are that a Sharpin V2 is installed and a reciva device including remote controll. Also that the backlight is flashing for some seconds a minute.
Or is it wrong place with the wrong Issue? Sounds great! I just used the standard instructions and it worked first time. Installing sharpfin worked with the standard procedure. Grace Forum Reciva Forum. Navigation menu Personal tools Log in.
Namespaces Page Discussion.
0コメント